Drive Shaft Split Brace - Compatible w/ Traxxas X-Maxx - Black
$17.74
Sale price
$17.74
Regular price
Skip to product information
Frustrated by endless bent driveshafts after a day of bashing your XMaxx? Say goodbye to the irritating rubbing noise and broken parts with this simple yet effective upgrade. This modification utilizes the stock Traxxas aluminum shaft, cut into two manageable pieces (152mm and 187mm), and bolstered by a centrally positioned support bearing. This ingenious design allows for greater chassis flex without compromising the driveshaft's integrity, keeping your XMaxx ripping through tough terrain, whether you're running the 6S or 8S version. So ditch the frustration and upgrade your driveshaft today for smoother bashing and worry-free fun!
PARTS NEEDED FOR INSTALL
-1 5-15-24 bearing
-bearing oil
-2mm allen
-2.5mm allen
Installation & Step by Step:
machine down center of union slighlty if needed for bearing fitment to be slight press fit
shaft length will need to be 152mm and 187mm
after cutting clean splines then install into chassis. short shaft rear. long shaft front
spread small thin layer of grease or oil on bearing facing skidplate to mark bearing location
set skid plate on then remove and notch oil/grease location.
clean oil/grease off bearing and install skid plate
Step 1
flip Xmaxx upside down remove 8 (2.5mm) center skid plate bolts. Remove skid plate.
Step 2
Flip right side up. Remove 4 (2.5mm) front chassis & 2 (2.5mm) chassis brace bolts & 2 (2.5mm) countersunk chassis bolts & 1 (2mm) steering link bolt.
Step 3
Remove front bulkhead assembly and centershaft. watch for spline piece at rear to fall loose(remove with small magnet). Flip upsidedown install insert into chassis center (only fits one way)
Step 4
Install spline and rear (short) shaft into center/rear diff. Lift slightly and install center bearing assembly slide in and then down. Once installed install front (long) shaft.
Step 5
Line up front shaft and install front bulkhead. May need to rotate drivetain slightly to line up splines. Reverse procedure and install new skid plate.
How is it made?
This item is made from 100% solid PETG which is FDM 3D-Printed on commercial Machines! These parts are guaranteed to be acceptable strength for the application.
How is it shipped?
USPS! Shipping is free for you if you're located in the continental United States!
Is there a warranty?
Yes! This product comes with a lifetime replacement warranty. If it breaks, simply send us an image of the broken part and we will ship you a new one!
I think theres a problem with my order?
No worries, we have you covered! If you have any issues whatsoever, please contact us!
What else do you offer?
We offer a wide variety of 3d print services such as design and print on demand in a variety of materials at a fair price. Simply send us a message to get started designing or printing your custom part today for any project you need and check out our profile for our other items!
All design credit goes to: https://www.thingiverse.com/jeremy_the_goat/design... (https://www.thingiverse.com/jeremy_the_goat/designs
Drive Shaft Split Brace - Compatible w/ Traxxas X-Maxx - Black
$17.74
Sale price
$17.74
Regular price
PARTS NEEDED FOR INSTALL
-1 5-15-24 bearing
-bearing oil
-2mm allen
-2.5mm allen
Installation & Step by Step:
machine down center of union slighlty if needed for bearing fitment to be slight press fit
shaft length will need to be 152mm and 187mm
after cutting clean splines then install into chassis. short shaft rear. long shaft front
spread small thin layer of grease or oil on bearing facing skidplate to mark bearing location
set skid plate on then remove and notch oil/grease location.
clean oil/grease off bearing and install skid plate
Step 1
flip Xmaxx upside down remove 8 (2.5mm) center skid plate bolts. Remove skid plate.
Step 2
Flip right side up. Remove 4 (2.5mm) front chassis & 2 (2.5mm) chassis brace bolts & 2 (2.5mm) countersunk chassis bolts & 1 (2mm) steering link bolt.
Step 3
Remove front bulkhead assembly and centershaft. watch for spline piece at rear to fall loose(remove with small magnet). Flip upsidedown install insert into chassis center (only fits one way)
Step 4
Install spline and rear (short) shaft into center/rear diff. Lift slightly and install center bearing assembly slide in and then down. Once installed install front (long) shaft.
Step 5
Line up front shaft and install front bulkhead. May need to rotate drivetain slightly to line up splines. Reverse procedure and install new skid plate.
How is it made?
This item is made from 100% solid PETG which is FDM 3D-Printed on commercial Machines! These parts are guaranteed to be acceptable strength for the application.
How is it shipped?
USPS! Shipping is free for you if you're located in the continental United States!
Is there a warranty?
Yes! This product comes with a lifetime replacement warranty. If it breaks, simply send us an image of the broken part and we will ship you a new one!
I think theres a problem with my order?
No worries, we have you covered! If you have any issues whatsoever, please contact us!
What else do you offer?
We offer a wide variety of 3d print services such as design and print on demand in a variety of materials at a fair price. Simply send us a message to get started designing or printing your custom part today for any project you need and check out our profile for our other items!
All design credit goes to: https://www.thingiverse.com/jeremy_the_goat/design... (https://www.thingiverse.com/jeremy_the_goat/designs